Operational curves to measure quality in a logistics distribution center
DOI:
https://doi.org/10.58763/rc2026648Keywords:
average run performance, operating curves, quality, Six SigmaAbstract
Introduction: The purpose of this applied study is to analyze and control the behavior of a logistics distribution system, estimating the service threshold required to demonstrate significant variations in the Sigma level. Methodology: A quantitative and rational methodology was used, establishing an evaluation model and measurement criteria based on operating curves and Six Sigma metrics. Results: The evaluation of the logistics system and its processes revealed considerable variations in the quality levels, ranging from a minimum of 2.92 to a maximum of 5.58; that is, quality performance varies between Deficient and Excellent according to the established performance criteria. Furthermore, this variation impacts the number of defects per million opportunities (DPMO), the number of nonconformities (), and process yield (). Finally, the analysis of the Average Run Performance (ARP) curves shows that processes such as distribution require a larger number of units to detect shifts between Zi and Zii. Conclusions: It is demonstrated that integrating Average Run Performance (ARP) curve analysis and Six Sigma methodology into logistics systems optimizes operational quality, supports managerial decision-making, and systematically reduces nonconformities.
References
Ascón, J. E. G., Natividad, R. o. S., Sotelo, J. F. A., Alegre, L. R. R., Pittman, J. A. A., Loza, A. D. M. B., & Tiznado, M. D. P. (2022). Six Sigma and improvement of the logistics process in the construction retail industry. Proceedings Of The 20th LACCEI International Multi-Conference For Engineering, Education And Technology: “Education, Research And Leadership In Post-pandemic Engineering: Resilient, Inclusive And Sustainable Actions”. https://doi.org/10.18687/laccei2022.1.1.789
Balza Franco, V., Paternina Arboleda, C., & Cardona Arbeláez, D. (2019). Prácticas colaborativas en la cadena de suministro: una revisión conceptual. Saber, ciencia y libertad, 14(2), 77-101. https://www.redalyc.org/articulo.oa?id=736980319005
Benavides, M. R. C., Cortés, J. A. Z., & Barrios, N. R. (2026). Models for risk management in the procurement process within organizational contexts: A systematic literature review. Multidisciplinary Reviews, 10(2), 2027101. https://doi.org/10.31893/multirev.2027101
Bharath, A. A., & Shankar, M. G. (2020). Developing a framework for economically improving the quality of a construction process by Six Sigma. International Journal Of Six Sigma And Competitive Advantage, 12(2-3), 294-312. https://doi.org/10.1504/IJSSCA.2020.110978
Delahoz-Domínguez, E., Zuluaga-Ortiz, R., Periñan-Luna, A., & Mendoza-Brand, S. (2022). Un enfoque de Seis Sigma para evaluar la calidad de la educación superior en Colombia. Revista De Métodos Cuantitativos Para La Economía Y La Empresa, 33, 386–407. https://doi.org/10.46661/revmetodoscuanteconempresa.5313
Fontalvo Herrera, T. J., Banquez Maturana, A. G., & Mendoza Villero, K. (2024). Performance of a concurrent parallel production system through new operating curves of Six Sigma metrics. Production, 34, e20230040. https://doi.org/10.1590/0103-6513.20230040
Fontalvo Herrera, T. J., Delahoz-Domínguez, E. J., & Barrios, N. R. (2026). Evaluation and Prediction Methods for a Steel Company Using Six Sigma Metrics, Capability Indicators, and Markov Chains. Eng, 7(8), 383. https://doi.org/10.3390/eng7080383
Fontalvo Herrera, T., Mejia Zambrano, F., & Oyuela Rodríguez, G. (2024). Evaluación con curvas de operación de métricas seis sigma el desempeño de sistemas productivos mixtos. Investigación E Innovación En Ingenierías, 12(1), 1–12. https://doi.org/10.17081/invinno.12.1.6680
Fontalvo-Herrera, T., Morelos-Gómez, J., & Simancas-Caicedo, S. A. (2025). Evaluación del desempeño de un sistema de transporte de pasajeros y carga mediante curvas de operación, métricas Seis Sigma y un indicador de capacidad geométrico multivariable. Saber, Ciencia y Libertad, 20(2), 343-373. https://doi.org/10.18041/2382-3240/saber.2025v20n2.13214
Garcia Ramos, K. E., & Pareja Huacausi, J. M. (2021). Análisis de experiencias de la metodología Six Sigma en las organizaciones en los últimos diez años. Una revisión de la literatura. https://hdl.handle.net/11537/27705
Gutiérrez, J. N. M., Saldivar, D. O., Chumacero, S. M. Q., Cuadros, M. J. L., Curo, G. G., & Dumont, J. R. D. (2021). Estrategia de mejora de procesos Six Sigma aplicado a la industria textil. Revista De Investigación Científica Y Tecnológica Alpha Centauri, 2(3), 72–90. https://doi.org/10.47422/ac.v2i3.45
Kumar, S., & Khanduja, D. (2021). Cost of poor quality reduction in auto sector: an exploration with Six-Sigma. International Journal of Six Sigma and Competitive Advantage, 13(1-3), 271-288. https://doi.org/10.1504/IJSSCA.2021.120249
Kumar, S., Brahma, G., Kaur, P., & Gupta, B. K. (2020). A case study on quality improvement of connecting rod assembly line using Six Sigma DMAIC cycle. International Journal Of Six Sigma And Competitive Advantage, 12(2-3), 234-249. https://doi.org/10.1504/ijssca.2020.110982
Luna Amador, J. A. (2021). Implementación de la metodología Sigma Seis como herramienta de gestión en el proceso de manejo de equipajes en una aerolínea en la ciudad de Cartagena. Revista De Jóvenes Investigadores AD Valorem, 4(2), 103–120. https://doi.org/10.32997/RJIA-vol.4-num.2-2021-3703
Markowski, T., & Bilski, P. (2021). Optimization of Autonomous Agent Routes in Logistics Warehouse. International Journal Of Electronics And Telecommunications, 67(4), 559-564. https://doi.org/10.24425/ijet.2021.137846
Mendoza, L. P., & Suarez, E. V. (2023b). Lean Six Sigma como herramienta de apoyo en la logística empresarial. Una Revisión Sistemática de la Literatura. Boletín De Innovación, Logística Y Operaciones, 5(2), 50–61. https://doi.org/10.17981/bilo.5.2.2023.05
Mittal, S., Khan, M. A., Purohit, J. K., Menon, K., Romero, D., & Wuest, T. (2019). A smart manufacturing adoption framework for SMEs. International Journal Of Production Research, 58(5), 1555-1573. https://doi.org/10.1080/00207543.2019.1661540
Panayiotou, N. A., & Stergiou, K. E. (2023). Development of a retail supply chain process reference model incorporating Lean Six Sigma initiatives. International Journal Of Lean Six Sigma, 14(1), 209-251. https://doi.org/10.1108/ijlss-04-2021-0079
Pano Nava, C. M., Núñez Piña, F., Zapien Rodríguez, J. M., Lazcano Cortes, G., & Núñez Pérez, F. A. (2022). Lean six sigma para solución de problemas logísticos: caso real terminal de contenedores en Michoacán. Ciencia Latina Revista Científica Multidisciplinar, 6(1), 511-529. https://doi.org/10.37811/cl_rcm.v6i1.1515
Pinilla, J. C., Navarrete, F. N., Vergara, K. L., Campos, J. G., Navarrete, T., & Acevedo, J. S. C. (2021). Aplicación de la metodología seis sigma para mejorar la calidad de la estimación de densidad básica de la madera en Acacia mearnsii. Ciencia & Investigación Forestal, 27(1), 19–42. https://doi.org/10.52904/0718-4646.2021.470
Purba, H. H., Nindiani, A., Trimarjoko, A., Jaqin, C., Hasibuan, S., & Tampubolon, S. (2021). Increasing Sigma levels in productivity improvement and industrial sustainability with Six Sigma methods in manufacturing industry: A systematic literature review. Advances in Production Engineering & Management, 16(3), 307-325. https://doi.org/10.14743/apem2021.3.402
Ramires, F., & Sampaio, P. (2022). Process mining and lean six sigma: a novel approach to analyze the supply chain quality of a hospital. International Journal Of Lean Six Sigma, 13(3), 594-621. https://doi.org/10.1108/ijlss-12-2020-0226
Ramírez Pérez, J. F., López Torres, V. G., Hernández Castillo, S. A., & Morejón Valdés, M. (2021). Lean six sigma e industria 4.0, una revisión desde la administración de operaciones para la mejora continua de las organizaciones: lean six sigma e industria 4.0 en la administración de operaciones. UNESUM - Ciencias. Revista Científica Multidisciplinaria, 5(4), 151–168. https://doi.org/10.47230/unesum-ciencias.v5.n4.2021.584
Robledo-Fernández, J. C., del Carmen Angulo-Vásquez, M., & Cardona-Arbelaez, D. (2025). La Socialización Organizacional como Pilar para la Gestión del Conocimiento en Entidades Promotoras de Salud: Caso Mutualser EPS. Saber, Ciencia y Libertad, 20(1), 315-338. https://doi.org/10.18041/2382-3240/saber.2025v20n1.13166
Sáenz, L., Aguilera, K., Heredia, R., Romero, T., Donoso, C., & Singaña, M. (2021). Fragilización de aceros inoxidables dúplex SAF 2205 y SAF 2507 sometidos a tratamientos térmicos de envejecimiento artificial. Revista Ingeniería UC, 28(1), 121–128. https://doi.org/10.54139/revinguc.v28i1.7
Samaranayake, P., McLean, M. W., & Weerabahu, S. K. (2024). Application of lean and quality improvement methods for improving operational performance in coal supply chains: a case study. International Journal of Quality & Reliability Management, 41(6), 1594-1622. https://doi.org/10.1108/IJQRM-04-2023-0138
Sharma, J., Tyagi, M., Panchal, D., & Singh, R. P. (2022). Contemplation of food industry attributes confronted in smooth adoption of Lean Six Sigma practices. International Journal Of Six Sigma And Competitive Advantage, 14(1), 32-69. https://doi.org/10.1504/IJSSCA.2022.124294
Singh, M., & Rathi, R. (2020). Investigation of critical success factors associated with Lean Six Sigma implementation in MSMEs using best worst method. International Journal of Six Sigma and Competitive Advantage, 12(2-3), 209-233. https://doi.org/10.1504/IJSSCA.2020.110976
Şişman, G. (2023). Implementing Lean Six Sigma methodology to reduce the logistics cost: a case study in Turkey. International Journal Of Lean Six Sigma, 14(3), 610-629. https://doi.org/10.1108/ijlss-02-2022-0054
Veena, T., & Prabhushankar, G. (2020). Identification of Critical Success Factors for implementing Six Sigma methodology and grouping the factors based on ISO 9001:2015 QMS. International Journal Of Six Sigma And Competitive Advantage, 12(1), 1-19. https://doi.org/10.1504/IJSSCA.2020.107463
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Tomás José Fontalvo Herrera, Viviana Margarita Buelvas Deavila, Diego Alonso Cardona

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Este artículo se distribuye bajo la licencia Creative CommonsReconocimiento-NoComercial-CompartirIgual 4.0 Internacional. A menos que se indique lo contrario, el material publicado asociado se distribuye bajo la misma licencia.


